Extracting grouped objects into a flattened listReduce array of objects into object of arraysReducing a large...
Fencing style for blades that can attack from a distance
Test whether all array elements are factors of a number
What are the differences between the usage of 'it' and 'they'?
Writing rule stating superpower from different root cause is bad writing
Test if tikzmark exists on same page
Why does Kotter return in Welcome Back Kotter?
Equivalence principle before Einstein
How to add double frame in tcolorbox?
Do I have a twin with permutated remainders?
How much RAM could one put in a typical 80386 setup?
Modeling an IP Address
How can bays and straits be determined in a procedurally generated map?
"to be prejudice towards/against someone" vs "to be prejudiced against/towards someone"
Can divisibility rules for digits be generalized to sum of digits
Is it tax fraud for an individual to declare non-taxable revenue as taxable income? (US tax laws)
Voyeurism but not really
What does it mean to describe someone as a butt steak?
Why is consensus so controversial in Britain?
Why doesn't H₄O²⁺ exist?
Watching something be written to a file live with tail
What is the offset in a seaplane's hull?
Can an x86 CPU running in real mode be considered to be basically an 8086 CPU?
tikz: show 0 at the axis origin
Why doesn't Newton's third law mean a person bounces back to where they started when they hit the ground?
Extracting grouped objects into a flattened list
Reduce array of objects into object of arraysReducing a large array of objects to a simple object with 8 propertiesExtracting distinct HTML list items into a JavaScript arrayJoin arrays of objects by some identifierMove objects into embedded arraysJavascript / ES6 parse value from arrays of objectsTurn a list of words into a dictionaryExtracting data in ES6Data formatting, splitting objects & deleting key's/valuesExecute promise tree in order of declaration
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}
$begingroup$
I need to optimize this javascript method because it is a bit slow, I don't want to use the flat() command, as for some reason my angular6 app does not understand the vanilla flat() command, or display some annoying warning messages.
So check the below:
- my original object
- my result object desired
- my slow solution (works, but is slow)
1. my original object:
const data = [
{
"id": 1,
"name": "Application",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 17,
"icon": "access_time",
"title": "Daily Order Cut-Off Time",
"description": "Daily Order Cut-Off Time",
"code": "daily-order-cut-off-time",
"value": "09:35",
"valueType": "Time",
"configurationTypeId": 11,
"definition": {
"step": "none"
},
"isDefault": false
}
]
}
]
},
{
"id": 3,
"name": "Processing",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 1078,
"icon": "flash_on",
"title": "Auto Process",
"description": "Will process all orders that are in the same batch",
"code": "processing-auto-process",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
},
{
"id": 1074,
"icon": "subdirectory_arrow_right",
"title": "Allow Under Picking",
"description": "Allow under pick when processing order?",
"code": "processing-allow-under-picks",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
}
]
}
]
}
];
2. object desired:
[
{
"id": 17,
"code": "daily-order-cut-off-time",
"value": "09:35"
},
{
"id": 1078,
"code": "processing-auto-process",
"value": "0"
},
{
"id": 1074,
"code": "processing-allow-under-picks",
"value": "0"
}
]
My slow solution:
const result = data.map(module => module.groups.map(configurations => configurations.configurations.map(config => ({ id: config.id, code: config.code, value: config.value })))).reduce((l,n) => l.concat(n), []).reduce((l2,n2) => l2.concat(n2),[]));
javascript ecmascript-6
edited Mar 29 at 5:23
200_success
131k17157422
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
$endgroup$
add a comment |
$begingroup$
I need to optimize this javascript method because it is a bit slow, I don't want to use the flat() command, as for some reason my angular6 app does not understand the vanilla flat() command, or display some annoying warning messages.
So check the below:
- my original object
- my result object desired
- my slow solution (works, but is slow)
1. my original object:
const data = [
{
"id": 1,
"name": "Application",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 17,
"icon": "access_time",
"title": "Daily Order Cut-Off Time",
"description": "Daily Order Cut-Off Time",
"code": "daily-order-cut-off-time",
"value": "09:35",
"valueType": "Time",
"configurationTypeId": 11,
"definition": {
"step": "none"
},
"isDefault": false
}
]
}
]
},
{
"id": 3,
"name": "Processing",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 1078,
"icon": "flash_on",
"title": "Auto Process",
"description": "Will process all orders that are in the same batch",
"code": "processing-auto-process",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
},
{
"id": 1074,
"icon": "subdirectory_arrow_right",
"title": "Allow Under Picking",
"description": "Allow under pick when processing order?",
"code": "processing-allow-under-picks",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
}
]
}
]
}
];
2. object desired:
[
{
"id": 17,
"code": "daily-order-cut-off-time",
"value": "09:35"
},
{
"id": 1078,
"code": "processing-auto-process",
"value": "0"
},
{
"id": 1074,
"code": "processing-allow-under-picks",
"value": "0"
}
]
My slow solution:
const result = data.map(module => module.groups.map(configurations => configurations.configurations.map(config => ({ id: config.id, code: config.code, value: config.value })))).reduce((l,n) => l.concat(n), []).reduce((l2,n2) => l2.concat(n2),[]));
javascript ecmascript-6
edited Mar 29 at 5:23
200_success
131k17157422
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
$endgroup$
2
$begingroup$
Is the ES6 spread operator available to you?result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
$endgroup$
– Oh My Goodness
Mar 28 at 23:33
$begingroup$
yes it is available.
$endgroup$
– Roger Oliveira
Mar 28 at 23:50
$begingroup$
AMAZING! YOUR CODE IS BEAUTIFUL!, please answer my question I will mark as the correct answer!
$endgroup$
– Roger Oliveira
Mar 28 at 23:55
add a comment |
$begingroup$
I need to optimize this javascript method because it is a bit slow, I don't want to use the flat() command, as for some reason my angular6 app does not understand the vanilla flat() command, or display some annoying warning messages.
So check the below:
- my original object
- my result object desired
- my slow solution (works, but is slow)
1. my original object:
const data = [
{
"id": 1,
"name": "Application",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 17,
"icon": "access_time",
"title": "Daily Order Cut-Off Time",
"description": "Daily Order Cut-Off Time",
"code": "daily-order-cut-off-time",
"value": "09:35",
"valueType": "Time",
"configurationTypeId": 11,
"definition": {
"step": "none"
},
"isDefault": false
}
]
}
]
},
{
"id": 3,
"name": "Processing",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 1078,
"icon": "flash_on",
"title": "Auto Process",
"description": "Will process all orders that are in the same batch",
"code": "processing-auto-process",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
},
{
"id": 1074,
"icon": "subdirectory_arrow_right",
"title": "Allow Under Picking",
"description": "Allow under pick when processing order?",
"code": "processing-allow-under-picks",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
}
]
}
]
}
];
2. object desired:
[
{
"id": 17,
"code": "daily-order-cut-off-time",
"value": "09:35"
},
{
"id": 1078,
"code": "processing-auto-process",
"value": "0"
},
{
"id": 1074,
"code": "processing-allow-under-picks",
"value": "0"
}
]
My slow solution:
const result = data.map(module => module.groups.map(configurations => configurations.configurations.map(config => ({ id: config.id, code: config.code, value: config.value })))).reduce((l,n) => l.concat(n), []).reduce((l2,n2) => l2.concat(n2),[]));
javascript ecmascript-6
edited Mar 29 at 5:23
200_success
131k17157422
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
$endgroup$
I need to optimize this javascript method because it is a bit slow, I don't want to use the flat() command, as for some reason my angular6 app does not understand the vanilla flat() command, or display some annoying warning messages.
So check the below:
- my original object
- my result object desired
- my slow solution (works, but is slow)
1. my original object:
const data = [
{
"id": 1,
"name": "Application",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 17,
"icon": "access_time",
"title": "Daily Order Cut-Off Time",
"description": "Daily Order Cut-Off Time",
"code": "daily-order-cut-off-time",
"value": "09:35",
"valueType": "Time",
"configurationTypeId": 11,
"definition": {
"step": "none"
},
"isDefault": false
}
]
}
]
},
{
"id": 3,
"name": "Processing",
"groups": [
{
"groupName": "",
"configurations": [
{
"id": 1078,
"icon": "flash_on",
"title": "Auto Process",
"description": "Will process all orders that are in the same batch",
"code": "processing-auto-process",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
},
{
"id": 1074,
"icon": "subdirectory_arrow_right",
"title": "Allow Under Picking",
"description": "Allow under pick when processing order?",
"code": "processing-allow-under-picks",
"value": "0",
"valueType": "Boolean",
"configurationTypeId": 6,
"definition": null,
"isDefault": false
}
]
}
]
}
];
2. object desired:
[
{
"id": 17,
"code": "daily-order-cut-off-time",
"value": "09:35"
},
{
"id": 1078,
"code": "processing-auto-process",
"value": "0"
},
{
"id": 1074,
"code": "processing-allow-under-picks",
"value": "0"
}
]
My slow solution:
const result = data.map(module => module.groups.map(configurations => configurations.configurations.map(config => ({ id: config.id, code: config.code, value: config.value })))).reduce((l,n) => l.concat(n), []).reduce((l2,n2) => l2.concat(n2),[]));
javascript ecmascript-6
javascript ecmascript-6
edited Mar 29 at 5:23
200_success
131k17157422
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
edited Mar 29 at 5:23
200_success
131k17157422
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
edited Mar 29 at 5:23
200_success
131k17157422
edited Mar 29 at 5:23
200_success
131k17157422
edited Mar 29 at 5:23
200_success
131k17157422
131k17157422
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
asked Mar 28 at 22:48
Roger OliveiraRoger Oliveira
150111
150111
2
$begingroup$
Is the ES6 spread operator available to you?result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
$endgroup$
– Oh My Goodness
Mar 28 at 23:33
$begingroup$
yes it is available.
$endgroup$
– Roger Oliveira
Mar 28 at 23:50
$begingroup$
AMAZING! YOUR CODE IS BEAUTIFUL!, please answer my question I will mark as the correct answer!
$endgroup$
– Roger Oliveira
Mar 28 at 23:55
add a comment |
2
$begingroup$
Is the ES6 spread operator available to you?result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
$endgroup$
– Oh My Goodness
Mar 28 at 23:33
$begingroup$
yes it is available.
$endgroup$
– Roger Oliveira
Mar 28 at 23:50
$begingroup$
AMAZING! YOUR CODE IS BEAUTIFUL!, please answer my question I will mark as the correct answer!
$endgroup$
– Roger Oliveira
Mar 28 at 23:55
2
2
$begingroup$
Is the ES6 spread operator available to you?
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))$endgroup$
– Oh My Goodness
Mar 28 at 23:33
$begingroup$
Is the ES6 spread operator available to you?
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))$endgroup$
– Oh My Goodness
Mar 28 at 23:33
$begingroup$
yes it is available.
$endgroup$
– Roger Oliveira
Mar 28 at 23:50
$begingroup$
yes it is available.
$endgroup$
– Roger Oliveira
Mar 28 at 23:50
$begingroup$
AMAZING! YOUR CODE IS BEAUTIFUL!, please answer my question I will mark as the correct answer!
$endgroup$
– Roger Oliveira
Mar 28 at 23:55
$begingroup$
AMAZING! YOUR CODE IS BEAUTIFUL!, please answer my question I will mark as the correct answer!
$endgroup$
– Roger Oliveira
Mar 28 at 23:55
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
As commented, the ES6 spread operator flattens like you want. The syntax is a little weird for multiple invocations:
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
The arr.flat() method does the same thing more simply. It takes an optional depth argument to indicate how many levels to descend when flattening. In your case, depth is 2.
.flat is a recent feature that may not exist on your platform. Most notably, Node 10 and MS Edge do not have it, while both of those do have the spread operator:
data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value})))).flat(2)
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
$endgroup$
$begingroup$
also, the use of the command .flat() would help somehow in this solution? thanks.
$endgroup$
– Roger Oliveira
Mar 29 at 3:01
$begingroup$
yes, if you have it. See my edit.
$endgroup$
– Oh My Goodness
Mar 29 at 13:20
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "196"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fcodereview.stackexchange.com%2fquestions%2f216454%2fextracting-grouped-objects-into-a-flattened-list%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
As commented, the ES6 spread operator flattens like you want. The syntax is a little weird for multiple invocations:
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
The arr.flat() method does the same thing more simply. It takes an optional depth argument to indicate how many levels to descend when flattening. In your case, depth is 2.
.flat is a recent feature that may not exist on your platform. Most notably, Node 10 and MS Edge do not have it, while both of those do have the spread operator:
data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value})))).flat(2)
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
$endgroup$
$begingroup$
also, the use of the command .flat() would help somehow in this solution? thanks.
$endgroup$
– Roger Oliveira
Mar 29 at 3:01
$begingroup$
yes, if you have it. See my edit.
$endgroup$
– Oh My Goodness
Mar 29 at 13:20
add a comment |
$begingroup$
As commented, the ES6 spread operator flattens like you want. The syntax is a little weird for multiple invocations:
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
The arr.flat() method does the same thing more simply. It takes an optional depth argument to indicate how many levels to descend when flattening. In your case, depth is 2.
.flat is a recent feature that may not exist on your platform. Most notably, Node 10 and MS Edge do not have it, while both of those do have the spread operator:
data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value})))).flat(2)
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
$endgroup$
$begingroup$
also, the use of the command .flat() would help somehow in this solution? thanks.
$endgroup$
– Roger Oliveira
Mar 29 at 3:01
$begingroup$
yes, if you have it. See my edit.
$endgroup$
– Oh My Goodness
Mar 29 at 13:20
add a comment |
$begingroup$
As commented, the ES6 spread operator flattens like you want. The syntax is a little weird for multiple invocations:
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
The arr.flat() method does the same thing more simply. It takes an optional depth argument to indicate how many levels to descend when flattening. In your case, depth is 2.
.flat is a recent feature that may not exist on your platform. Most notably, Node 10 and MS Edge do not have it, while both of those do have the spread operator:
data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value})))).flat(2)
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
$endgroup$
As commented, the ES6 spread operator flattens like you want. The syntax is a little weird for multiple invocations:
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))
The arr.flat() method does the same thing more simply. It takes an optional depth argument to indicate how many levels to descend when flattening. In your case, depth is 2.
.flat is a recent feature that may not exist on your platform. Most notably, Node 10 and MS Edge do not have it, while both of those do have the spread operator:
data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value})))).flat(2)
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
edited Mar 29 at 13:26
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
answered Mar 29 at 0:13
Oh My GoodnessOh My Goodness
2,192315
2,192315
$begingroup$
also, the use of the command .flat() would help somehow in this solution? thanks.
$endgroup$
– Roger Oliveira
Mar 29 at 3:01
$begingroup$
yes, if you have it. See my edit.
$endgroup$
– Oh My Goodness
Mar 29 at 13:20
add a comment |
$begingroup$
also, the use of the command .flat() would help somehow in this solution? thanks.
$endgroup$
– Roger Oliveira
Mar 29 at 3:01
$begingroup$
yes, if you have it. See my edit.
$endgroup$
– Oh My Goodness
Mar 29 at 13:20
$begingroup$
also, the use of the command .flat() would help somehow in this solution? thanks.
$endgroup$
– Roger Oliveira
Mar 29 at 3:01
$begingroup$
also, the use of the command .flat() would help somehow in this solution? thanks.
$endgroup$
– Roger Oliveira
Mar 29 at 3:01
$begingroup$
yes, if you have it. See my edit.
$endgroup$
– Oh My Goodness
Mar 29 at 13:20
$begingroup$
yes, if you have it. See my edit.
$endgroup$
– Oh My Goodness
Mar 29 at 13:20
add a comment |
Thanks for contributing an answer to Code Review Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fcodereview.stackexchange.com%2fquestions%2f216454%2fextracting-grouped-objects-into-a-flattened-list%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
$begingroup$
Is the ES6 spread operator available to you?
result = [].concat(...[].concat(...data.map( d => d.groups.map( g => g.configurations.map( c => ({id:c.id, code:c.code, value:c.value}))))))$endgroup$
– Oh My Goodness
Mar 28 at 23:33
$begingroup$
yes it is available.
$endgroup$
– Roger Oliveira
Mar 28 at 23:50
$begingroup$
AMAZING! YOUR CODE IS BEAUTIFUL!, please answer my question I will mark as the correct answer!
$endgroup$
– Roger Oliveira
Mar 28 at 23:55