What is the role of the transistor and diode in a soft start circuit? Announcing the arrival...
List *all* the tuples!
How does a Death Domain cleric's Touch of Death feature work with Touch-range spells delivered by familiars?
What does '1 unit of lemon juice' mean in a grandma's drink recipe?
What do you call a phrase that's not an idiom yet?
How to deal with my PhD supervisors rudely critiquing all my draft papers?
When is phishing education going too far?
What are the motives behind Cersei's orders given to Bronn?
Right-skewed distribution with mean equals to mode?
How to deal with a team lead who never gives me credit?
What does the "x" in "x86" represent?
Is it ethical to give a final exam after the professor has quit before teaching the remaining chapters of the course?
Problem drawing boxes with arrows in tikZ
Can inflation occur in a positive-sum game currency system such as the Stack Exchange reputation system?
Determinant is linear as a function of each of the rows of the matrix.
Why don't the Weasley twins use magic outside of school if the Trace can only find the location of spells cast?
Why constant symbols in a language?
Why did the IBM 650 use bi-quinary?
Is a manifold-with-boundary with given interior and non-empty boundary essentially unique?
What would be the ideal power source for a cybernetic eye?
What are 'alternative tunings' of a guitar and why would you use them? Doesn't it make it more difficult to play?
What happens to sewage if there is no river near by?
How can players work together to take actions that are otherwise impossible?
Storing hydrofluoric acid before the invention of plastics
Stars Make Stars
What is the role of the transistor and diode in a soft start circuit?
Announcing the arrival of Valued Associate #679: Cesar Manara
Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern)Soft Clipping with DiodeHow protective diode protects transistor from breakdown?What is the purpose of transistor in this circuit?What is the role of the diode in the circuit?Diode transistor circuit logicWhat's the role of the transistor in this circuit?Parallel Diode with AC voltage and DC voltageWhat is the use of the diode in this circuitLM317 Soft-start circuitESD diode with zener configuration is equivalent to a circuit containing diode, transistor and zener diode, so how this could be equivalent
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}
$begingroup$
Please can someone explain the purpose of both the transistor and diode in this soft start circuit
transistors circuit-analysis voltage-regulator diodes linear-regulator
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
Please can someone explain the purpose of both the transistor and diode in this soft start circuit
transistors circuit-analysis voltage-regulator diodes linear-regulator
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
$begingroup$
Who has downvoted this question and why ? please explain.
$endgroup$
– MikeTeX
1 hour ago
$begingroup$
@MikeTeX Asking about some circuit but not including it will get downvotes. It is fixed now though.
$endgroup$
– Bimpelrekkie
54 mins ago
add a comment |
$begingroup$
Please can someone explain the purpose of both the transistor and diode in this soft start circuit
transistors circuit-analysis voltage-regulator diodes linear-regulator
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
Please can someone explain the purpose of both the transistor and diode in this soft start circuit
transistors circuit-analysis voltage-regulator diodes linear-regulator
transistors circuit-analysis voltage-regulator diodes linear-regulator
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 30 mins ago
Andy West
435317
435317
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 1 hour ago
![](https://lh3.googleusercontent.com/-ixNk0A98fzo/AAAAAAAAAAI/AAAAAAAAAlA/EDpxhq6gS5k/photo.jpg?sz=32)
![](https://lh3.googleusercontent.com/-ixNk0A98fzo/AAAAAAAAAAI/AAAAAAAAAlA/EDpxhq6gS5k/photo.jpg?sz=32)
Soubhagya Ranjan SahooSoubhagya Ranjan Sahoo
163
163
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Soubhagya Ranjan Sahoo is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$begingroup$
Who has downvoted this question and why ? please explain.
$endgroup$
– MikeTeX
1 hour ago
$begingroup$
@MikeTeX Asking about some circuit but not including it will get downvotes. It is fixed now though.
$endgroup$
– Bimpelrekkie
54 mins ago
add a comment |
$begingroup$
Who has downvoted this question and why ? please explain.
$endgroup$
– MikeTeX
1 hour ago
$begingroup$
@MikeTeX Asking about some circuit but not including it will get downvotes. It is fixed now though.
$endgroup$
– Bimpelrekkie
54 mins ago
$begingroup$
Who has downvoted this question and why ? please explain.
$endgroup$
– MikeTeX
1 hour ago
$begingroup$
Who has downvoted this question and why ? please explain.
$endgroup$
– MikeTeX
1 hour ago
$begingroup$
@MikeTeX Asking about some circuit but not including it will get downvotes. It is fixed now though.
$endgroup$
– Bimpelrekkie
54 mins ago
$begingroup$
@MikeTeX Asking about some circuit but not including it will get downvotes. It is fixed now though.
$endgroup$
– Bimpelrekkie
54 mins ago
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
The diode is there to discharge C2 through the bulb when the battery is disconnected.
Discharging C2 "resets" the soft start circuit. When C2 is discharged and the battery voltage is applied, the LM317 outputs some voltage at its output (pin 2) this pulls up the voltage at the emitter of the PNP transistor. Since C2 is discharged the PNP's base is still at 0 Volt (I'm assuming the battery's negative connection is ground, unfortunately there is no ground symbol drawn in this schematic).
So there will be some voltage between base and emitter of the PNP which will switch it on. That will limit the voltage at the emitter of the PNP to about 0.7 V.
The LM317 tries to maintain 1.25 V between its pins 1 and 2 so the output voltage is now limited to about 0.7 V + 1.25 V = 1.95 V. As long as C2 is not charged.
However, R3 will charge C2 so the voltage across C2 will increase, the output voltage of the LM317 will increase with it. The output voltage will be about: Vout = 1.95 V + V(C2).
The charging of C2 stops when the normal output voltage (set by R1 and R2) is reached then the voltage at pin 1 of the LM317 will no longer increase. Then almost no current will flow through the PNP and C2 will be charged to the same voltage as pin 1 of the LM317.
When the battery is disconnected C2 needs to be discharged quickly so that the circuit is ready for the next startup. This discharging is done by the diode. Without the diode C2 would have to discharge through R3 and the rest of the circuit. That will take a while since R3 has a high value. Through the diode, discharging is almost "immediate".
$endgroup$
add a comment |
$begingroup$
At the beginning, C2 is not charged so the base of the transistor is at ground and the transistor is conducting (its resistance R is low). This means that the ratio R2/R that dominates the behavior of the LM317 here is high and the LM317 is almost not conducting. As C2 charges, the transistor is less and less conducting and the ratio R2/R becomes lower and lower, which causes the LM317 to conduct more and more. Finally, the transistor is not conducting and the behaviour of the LM317 is dominated by the ratio R2/R1, that fixes the final output voltage.
The diode may be here to protect the LM317 from some reverse current (but I don't see what current), or more probably to discharge C2 after turning off.
$endgroup$
$begingroup$
I was editing my answer when Bimplerekkie has posted his own first. Sorry for the repetition.
$endgroup$
– MikeTeX
47 mins ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "135"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Soubhagya Ranjan Sahoo is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f432805%2fwhat-is-the-role-of-the-transistor-and-diode-in-a-soft-start-circuit%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
The diode is there to discharge C2 through the bulb when the battery is disconnected.
Discharging C2 "resets" the soft start circuit. When C2 is discharged and the battery voltage is applied, the LM317 outputs some voltage at its output (pin 2) this pulls up the voltage at the emitter of the PNP transistor. Since C2 is discharged the PNP's base is still at 0 Volt (I'm assuming the battery's negative connection is ground, unfortunately there is no ground symbol drawn in this schematic).
So there will be some voltage between base and emitter of the PNP which will switch it on. That will limit the voltage at the emitter of the PNP to about 0.7 V.
The LM317 tries to maintain 1.25 V between its pins 1 and 2 so the output voltage is now limited to about 0.7 V + 1.25 V = 1.95 V. As long as C2 is not charged.
However, R3 will charge C2 so the voltage across C2 will increase, the output voltage of the LM317 will increase with it. The output voltage will be about: Vout = 1.95 V + V(C2).
The charging of C2 stops when the normal output voltage (set by R1 and R2) is reached then the voltage at pin 1 of the LM317 will no longer increase. Then almost no current will flow through the PNP and C2 will be charged to the same voltage as pin 1 of the LM317.
When the battery is disconnected C2 needs to be discharged quickly so that the circuit is ready for the next startup. This discharging is done by the diode. Without the diode C2 would have to discharge through R3 and the rest of the circuit. That will take a while since R3 has a high value. Through the diode, discharging is almost "immediate".
$endgroup$
add a comment |
$begingroup$
The diode is there to discharge C2 through the bulb when the battery is disconnected.
Discharging C2 "resets" the soft start circuit. When C2 is discharged and the battery voltage is applied, the LM317 outputs some voltage at its output (pin 2) this pulls up the voltage at the emitter of the PNP transistor. Since C2 is discharged the PNP's base is still at 0 Volt (I'm assuming the battery's negative connection is ground, unfortunately there is no ground symbol drawn in this schematic).
So there will be some voltage between base and emitter of the PNP which will switch it on. That will limit the voltage at the emitter of the PNP to about 0.7 V.
The LM317 tries to maintain 1.25 V between its pins 1 and 2 so the output voltage is now limited to about 0.7 V + 1.25 V = 1.95 V. As long as C2 is not charged.
However, R3 will charge C2 so the voltage across C2 will increase, the output voltage of the LM317 will increase with it. The output voltage will be about: Vout = 1.95 V + V(C2).
The charging of C2 stops when the normal output voltage (set by R1 and R2) is reached then the voltage at pin 1 of the LM317 will no longer increase. Then almost no current will flow through the PNP and C2 will be charged to the same voltage as pin 1 of the LM317.
When the battery is disconnected C2 needs to be discharged quickly so that the circuit is ready for the next startup. This discharging is done by the diode. Without the diode C2 would have to discharge through R3 and the rest of the circuit. That will take a while since R3 has a high value. Through the diode, discharging is almost "immediate".
$endgroup$
add a comment |
$begingroup$
The diode is there to discharge C2 through the bulb when the battery is disconnected.
Discharging C2 "resets" the soft start circuit. When C2 is discharged and the battery voltage is applied, the LM317 outputs some voltage at its output (pin 2) this pulls up the voltage at the emitter of the PNP transistor. Since C2 is discharged the PNP's base is still at 0 Volt (I'm assuming the battery's negative connection is ground, unfortunately there is no ground symbol drawn in this schematic).
So there will be some voltage between base and emitter of the PNP which will switch it on. That will limit the voltage at the emitter of the PNP to about 0.7 V.
The LM317 tries to maintain 1.25 V between its pins 1 and 2 so the output voltage is now limited to about 0.7 V + 1.25 V = 1.95 V. As long as C2 is not charged.
However, R3 will charge C2 so the voltage across C2 will increase, the output voltage of the LM317 will increase with it. The output voltage will be about: Vout = 1.95 V + V(C2).
The charging of C2 stops when the normal output voltage (set by R1 and R2) is reached then the voltage at pin 1 of the LM317 will no longer increase. Then almost no current will flow through the PNP and C2 will be charged to the same voltage as pin 1 of the LM317.
When the battery is disconnected C2 needs to be discharged quickly so that the circuit is ready for the next startup. This discharging is done by the diode. Without the diode C2 would have to discharge through R3 and the rest of the circuit. That will take a while since R3 has a high value. Through the diode, discharging is almost "immediate".
$endgroup$
The diode is there to discharge C2 through the bulb when the battery is disconnected.
Discharging C2 "resets" the soft start circuit. When C2 is discharged and the battery voltage is applied, the LM317 outputs some voltage at its output (pin 2) this pulls up the voltage at the emitter of the PNP transistor. Since C2 is discharged the PNP's base is still at 0 Volt (I'm assuming the battery's negative connection is ground, unfortunately there is no ground symbol drawn in this schematic).
So there will be some voltage between base and emitter of the PNP which will switch it on. That will limit the voltage at the emitter of the PNP to about 0.7 V.
The LM317 tries to maintain 1.25 V between its pins 1 and 2 so the output voltage is now limited to about 0.7 V + 1.25 V = 1.95 V. As long as C2 is not charged.
However, R3 will charge C2 so the voltage across C2 will increase, the output voltage of the LM317 will increase with it. The output voltage will be about: Vout = 1.95 V + V(C2).
The charging of C2 stops when the normal output voltage (set by R1 and R2) is reached then the voltage at pin 1 of the LM317 will no longer increase. Then almost no current will flow through the PNP and C2 will be charged to the same voltage as pin 1 of the LM317.
When the battery is disconnected C2 needs to be discharged quickly so that the circuit is ready for the next startup. This discharging is done by the diode. Without the diode C2 would have to discharge through R3 and the rest of the circuit. That will take a while since R3 has a high value. Through the diode, discharging is almost "immediate".
answered 54 mins ago
![](https://i.stack.imgur.com/SgFcy.png?s=32&g=1)
![](https://i.stack.imgur.com/SgFcy.png?s=32&g=1)
BimpelrekkieBimpelrekkie
51.5k246114
51.5k246114
add a comment |
add a comment |
$begingroup$
At the beginning, C2 is not charged so the base of the transistor is at ground and the transistor is conducting (its resistance R is low). This means that the ratio R2/R that dominates the behavior of the LM317 here is high and the LM317 is almost not conducting. As C2 charges, the transistor is less and less conducting and the ratio R2/R becomes lower and lower, which causes the LM317 to conduct more and more. Finally, the transistor is not conducting and the behaviour of the LM317 is dominated by the ratio R2/R1, that fixes the final output voltage.
The diode may be here to protect the LM317 from some reverse current (but I don't see what current), or more probably to discharge C2 after turning off.
$endgroup$
$begingroup$
I was editing my answer when Bimplerekkie has posted his own first. Sorry for the repetition.
$endgroup$
– MikeTeX
47 mins ago
add a comment |
$begingroup$
At the beginning, C2 is not charged so the base of the transistor is at ground and the transistor is conducting (its resistance R is low). This means that the ratio R2/R that dominates the behavior of the LM317 here is high and the LM317 is almost not conducting. As C2 charges, the transistor is less and less conducting and the ratio R2/R becomes lower and lower, which causes the LM317 to conduct more and more. Finally, the transistor is not conducting and the behaviour of the LM317 is dominated by the ratio R2/R1, that fixes the final output voltage.
The diode may be here to protect the LM317 from some reverse current (but I don't see what current), or more probably to discharge C2 after turning off.
$endgroup$
$begingroup$
I was editing my answer when Bimplerekkie has posted his own first. Sorry for the repetition.
$endgroup$
– MikeTeX
47 mins ago
add a comment |
$begingroup$
At the beginning, C2 is not charged so the base of the transistor is at ground and the transistor is conducting (its resistance R is low). This means that the ratio R2/R that dominates the behavior of the LM317 here is high and the LM317 is almost not conducting. As C2 charges, the transistor is less and less conducting and the ratio R2/R becomes lower and lower, which causes the LM317 to conduct more and more. Finally, the transistor is not conducting and the behaviour of the LM317 is dominated by the ratio R2/R1, that fixes the final output voltage.
The diode may be here to protect the LM317 from some reverse current (but I don't see what current), or more probably to discharge C2 after turning off.
$endgroup$
At the beginning, C2 is not charged so the base of the transistor is at ground and the transistor is conducting (its resistance R is low). This means that the ratio R2/R that dominates the behavior of the LM317 here is high and the LM317 is almost not conducting. As C2 charges, the transistor is less and less conducting and the ratio R2/R becomes lower and lower, which causes the LM317 to conduct more and more. Finally, the transistor is not conducting and the behaviour of the LM317 is dominated by the ratio R2/R1, that fixes the final output voltage.
The diode may be here to protect the LM317 from some reverse current (but I don't see what current), or more probably to discharge C2 after turning off.
answered 48 mins ago
MikeTeXMikeTeX
669416
669416
$begingroup$
I was editing my answer when Bimplerekkie has posted his own first. Sorry for the repetition.
$endgroup$
– MikeTeX
47 mins ago
add a comment |
$begingroup$
I was editing my answer when Bimplerekkie has posted his own first. Sorry for the repetition.
$endgroup$
– MikeTeX
47 mins ago
$begingroup$
I was editing my answer when Bimplerekkie has posted his own first. Sorry for the repetition.
$endgroup$
– MikeTeX
47 mins ago
$begingroup$
I was editing my answer when Bimplerekkie has posted his own first. Sorry for the repetition.
$endgroup$
– MikeTeX
47 mins ago
add a comment |
Soubhagya Ranjan Sahoo is a new contributor. Be nice, and check out our Code of Conduct.
Soubhagya Ranjan Sahoo is a new contributor. Be nice, and check out our Code of Conduct.
Soubhagya Ranjan Sahoo is a new contributor. Be nice, and check out our Code of Conduct.
Soubhagya Ranjan Sahoo is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f432805%2fwhat-is-the-role-of-the-transistor-and-diode-in-a-soft-start-circuit%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
Who has downvoted this question and why ? please explain.
$endgroup$
– MikeTeX
1 hour ago
$begingroup$
@MikeTeX Asking about some circuit but not including it will get downvotes. It is fixed now though.
$endgroup$
– Bimpelrekkie
54 mins ago